Basic Parametric Modifications

56. The length of the parallel middle body at the bow is quite short. Rather than modifying the control points of the curve, the length of the parallel section of deck can be taken forward by modifying the PDF (Parallel-Deck-Forward) parameter in the attributes panel and taking the curve forward to 85m.

57. This increase will mean that the strength of the surface tangent from the parallel middle body into the bow section of the hull surface is too high. This can be modied by reducing the TangentF% parameter to 10%.

The hull surface should now look like the image below.

Displaying IntelliHull Construction Geometry >>>